Chat & Social > The Bar - General Chat

LEDs

(1/6) > >>

YT:
I've been looking at LEDs recently, seriously looking. The upshot being. The headlights have been converted to 12.5/30w Cree units, a 20" x126w Cree bar on the A bar and a 40" x200w Cree bar on the roof.
This is what all those numbers look like on the road.

http://youtu.be/mDiu7JBKqvw

Mongrel:
Christ! That lights up the road ahead! So what and from where did you fit?

YT:
This is what's been fitted.



The 20" is a double row bar, the 40" is single row.
All use Cree chips (the most advanced/efficient LEDs on the market)
All sourced from eBay, the 40" was a bargain, as it was only £40 more than the 20" cost. (The 20" cost £120 from china. Free post & 4 day delivery)

Cookee:
Hi - I'm looking for a source of self contained headlights for a project, they will fit on a bull bar so need a surround as well - have you seen anything that will work as a proper dippable headlight or are they just spots?

YT:
The bars have 3 options, flood, spot, or combo, so probably won't do the job your after. The Cree halogen bulb replacement are full hi/low beam. The chips themselves line up position wise with standard halogen bulb filaments, so hit the headlight reflectors as they should to maintain beam pattern. If you went that route, any H3 headlight unit would work with your plans.
If you want a link to similar LEDs as the Crees give me a shout and I'll dig out a link. :)

Navigation

[0] Message Index

[#] Next page