Vehicle & Technical > Discovery

300tdi auto to manual conversion

(1/2) > >>

mattyme:
im contemplating converting to a manual box... any tips or pitfalls to look out for?

also.... anyone got a manual box for sale!!? lol

mroxo:
I am contemplating a manual to auto conversion.
You will need the engine backplate as they differ from auto and manual.
Obviously clutch and master/slave cylinders, flywheel, pedal box and gubbins.
Gearbox and crossmember. An engine hoist and jacks etc.
Theres a fair bit to do on the conversion but it can all be done by the competent DIY mechanic.
I have done one before and found it much easier to take the engine and box out in one and do the nut and bolt work on the deck.  In fact it was easier to do the peddal box with the engine out.

mattyme:
im still undecided which way to go... my kickdown is stuck at the moment and the box would benefit form a recon.... but i dont know whether to convert it or not as i like the auto.
its fly by wire, will i have to change that too if i go for the manual conversion?
i could just get another auto box off ebay for 3 or 4 hundred, and a recon will be more like 5 or 6 hundred. obviously id change the box myself so there is no labour involved..... what to do!! lol

Saffy:
I imagine you would have to change the centre console too.

mattyme:
yeah, the centre console has a different sized hole for the gearstick/selector... not a biggy tho.

Navigation

[0] Message Index

[#] Next page