Vehicle & Technical > Discovery

disco indicators

(1/3) > >>

python:
hi all. i bought a v8 disco and thought this was an easy fix. all the bulbs are working but the indicators flash fast on both sides. i have changed the relay twice so im stuck for ideas. i have the 300 series bumper set up. indicators in the bumper but not in the light cluster. i have the four pin relay but i have seen three pin ones. would one of them be what i need for this set up? or should i wire up anther bulb to slow down the flashing. thanks

Rossko:
Has someone put in LED lamps instead of regular bulbs? Or even 24V bulbs?

nismo2004:
had similer trouble when i removed the rear bumper lights, the relay is set up for the resistance or 6 bulbs, you need a 4 bulb relay and plug that in,

Range Rover Blues:
It flashes fast because it thinks you have a bulb failure.  The 4 pin has the trailer repeater and supposedly heavy duty contacts.  For a 300 series they can be really expensive becasue they aren't a standard size.

Right, for a 4 bulb relay you need a different part to the few cars that had 6 bulbs ei lamp clusters and bumper, a few were built by LR and many converted.

It should say something like 21wx2 + 5wx1 + 2wx1 on the one you need and I'd say the one you have says 21wx3.........

Plug in  a trailer and it will flash fine ;)

If you never tow you don't need a 4 pin.

python:
hi, thanks for the replys. my relay says 21wx4+5w+1.2w MAX 21wx8+5wx2+1.2wx2. hope that makes sense. would it help if i just unplugged the trailer wires? thanks.

Navigation

[0] Message Index

[#] Next page