Vehicle & Technical > Discovery

300tdi turbo

(1/1)

chris_harvey:
What's the best way to clean out a turbo??? An what tools or tricks for removing it as its all connected to the manifold ?? Thanks in advance

chris_harvey:
Brake clutch & carb cleaner ????

Range Rover Blues:
Fill it with WD40, leave it to soak in, you'll need to turn the blades to keep them wet.  Use a toothbrush to clean each blade then wash out with more WD40.

Soak out the dirty oil with kitchen rag, wash it out and dry again.

chris_harvey:
Thanks for the reply  :D I've been told that it could damaged the turbo tho if I clean it out as it runs on a film of oil for the bearing or sumthink ? Can u shed any light on that ??

Range Rover Blues:
That's why I don't use a degreaser.  The oil film is inside the bearing and should be sealed with a metal oil seal.  Don't use any pressure other than than generated by the oil can.  the turbo experiences far worse when it's in use.

Navigation

[0] Message Index

Go to full version