Vehicle & Technical > Discovery

What's that part called?

(1/2) > >>

keithiow:
Just taken the front bumper assembly of my Disco 2, cos I crunched it, and noticed that the metal tube that is bent and bolted to the box section chassis members is very badly rusted, (there is a hole in it!).

Having looked through some of the online sellers I can not find anything that matches the description.

So as the subject says, What's that part called? and anyone know where I can order one from or is it a main dealer jobby?

Cheers

andyhubbard:
Do you mean the towing eye?

keithiow:
Don't think so, it's a thick metal tube about 2 inch diameter and is flattened out at the ends and is bent up 90 degrees and is bolted to the two box section chassisisis?

disco2 td5:
Main dealer only the bottom of the bumper screws to it it's a steering guard. I messed mine up and it were about the same price to get a metal steering guard

Bikermutt:
Same issue here! I bought a proper steering guard which was cheaper than the OE part. Looks & performs much better.

Navigation

[0] Message Index

[#] Next page