Vehicle & Technical > Discovery

HELP! Wheelbearing issues...

<< < (3/3)

landroverkeith:
I always wind one of the bolts from the end cap into the end of the halfshaft to pull it out after Big Rich showed me how lol

Range Rover Blues:
Endfloat is the amount of free play along the axle line.  The CV joint should be able to move only slightly more than the hub on the stub axle.  if the CV is too tight it will try to prevent float in the hub bearings and get destroyed as a result.  If the endflaot is too great the Cv joint runs only part way into it's bearing which then collapses.

Navigation

[0] Message Index

[*] Previous page