Vehicle & Technical > Defender

Black clutch fluid.

<< < (2/2)

robbie:
according to Haynes.... pedal box has to come out too. I also thought it was just the two nuts.... :(

robbie:
thinking about it, because the cylinder is in back to front, the pedal box has to come out cos there isnt enough room otherwise

robbie:
yup... done the master cylinder change today and it does need to take the pedal box out..... not a bad job though

V8MoneyPit:
I've done a clutch master swap without removing the pedal box. One of the nuts is a pig to get at, but can be done.

robbie:
[q]I've done a clutch master swap without removing the pedal box. One of the nuts is a pig to get at, but can be done.[/q]

yeeh I guess it can be dnoe but if your referring to the bottom one of the two holding the cylinder in, I am sure it easier to undo 6 bolts from under the dash and get the whole box out. I tried to weigh up which was easiest and went for the box removal. It turned out to be a doddle of a job once it was out. I guess you also had the issue in tightening it back up again after....

Navigation

[0] Message Index

[*] Previous page

Go to full version