Vehicle & Technical > Discovery
rangerover auto box into discovery 200 series
scatt:
Hi All, Would like to pick your brains for a little info. I have been offered an auto box with t/box from a 89 3.5 v8 rangerover and want to know whats involved to fit it into a 3.5 v8 discovery of the same year?? obviously the rangerover would have a viscous coupling so could i put the t/box out of the disco on the auto from the rr??????
Any and all advice is gratefully recieved :D
Cheers Scatt
barmiebrumie:
V8 box has got the wrong ratios for a tdi, you will need an auto box from a desiel 200/300 :(
John
scatt:
Hi John, thanks for the reply i dont know if its how i typed it but there BOTH 3.5 V8 :dance:
Range Rover Blues:
The V8 engines are mchined identically on auto and manual. you need to remove the flywheel and bolt on an adapter, then the starter plate and rin gear. Next goes on the flex plate spacer followed by the flex plate and finally it's support ring.
onto the flex plate bolt the torque converter as you assembly the engine and gearbox.
The transfer box is fully interchangeable with the LT3230 or Borg-Warner but later LT230 had cross-drilled inputs shafts and need longer splines on the gearbox output shaft, though fitting a later box to an earlier car isn't an issue.
you will need the appropriate engine radiator with cooling for the auto box, the pipeswork and the bog brush (which was fitted to many manual 3.9 gearboxs)
You need the shifter, the transfer box lever and bracket, the console insert and sound deadening.
There's some wiring too but you may find it;s already on your car up to the multiplug above the gearbox.
scatt:
Thats basiclly what i wanted someone to tell me. The only thing i dont have is the car it came out of, the gearbox was removed by the person im buying it off. Im told it has the relevant bits for the torque converter, the main thing i dont have is the auto selector and pedal box if its needed?? will i need to change anything on the throttle for the kick down??
lastly anyone got a 200 series auto they might be breaking or scrapping. ;)
Navigation
[0] Message Index
[#] Next page
Go to full version