Vehicle & Technical > Discovery

300tdi lower rear indicators

<< < (2/3) > >>

TEMPER593:
How's that work then cos the 200 dont have um?  :-k

Would it be different if you had a drop down door on like on my mod'd pick up disco?

Cheers TEMP

stretchy:
i read somewere that the extra lights was to meet requirment laws in another country. Im prety sure they dont come into the mot in the uk

Range Rover Blues:
Wouldn't like to say, they were part of the type approval though as they were present when new.  As for the MOT, if they aren't there they can't test them, not really relevent, it's the lighting regs yyu need to check.

JPJ:
300TDi had two different designs for rear lights. Some like mine (1994) only had indicator/brake in the bumper some had the quarter light cluster and in the bumper also. I found some 200TDi quarter light clusters with indicator lenses and replaced mine and treated myself to a heavy duty bumper without any light cutouts. Pulled the wires through from the indicators and wired the new clusters up. Been through the MOT several times now with no probs.  If you're going to remove the lights from the bumper get a new bumper and pull the wires through. If you have the dual display then you can always wire them into bulbs and just leave them in the quarter panels where nobody will see them, that way you don't have to change the ECU.

craig_midz:
if rear bumper lights are fitted then they have to work for mot easiest way round it if u wanna get rid of em is to get either a 200 rear bumper or a hd one an to get around the indicator relay is easy just put 21w bulbs in the holder instead of 5w ones that way will think its runnin 2 bulbs instead of one ive had mine like that for over 2 years with no problems what so ever

Navigation

[0] Message Index

[#] Next page

[*] Previous page