AuthorTopic: Changing Brake Pads  (Read 3198 times)

0 Members and 1 Guest are viewing this topic.

Offline Hightower

  • Moderator
  • ***
  • Posts: 1112
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Changing Brake Pads
« on: July 10, 2010, 12:51:41 »
Changed the pads on our Astra 1.9CDTi this morning without issue.

However, upon testing them, the brake pedal is very soft on the first press, giving almost no braking. Second press of the pedal gives the usual sharp response that I have been used to.  Fluid is new and clear, no leaks visible.

What have I missed please, as this has never happened to me before on any other car that I have worked on . . . . . .
Simon
1998 Disco Series II Td5 - Not standard
1972 88" Series 3 - The project

Macmillan 4x4 UK Challenge
1st Overall - 2011, 2010, 2009, 2008, 2006, 2005
3rd Overall - 2007

Offline V8MoneyPit

  • Moderator
  • ***
  • Posts: 5077
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Changing Brake Pads
« Reply #1 on: July 10, 2010, 13:48:45 »
I have come across this from time to time. As long as you are getting correct braking, use the car for a while and you may find the pedal gets better. I can only think it's the caliper seals pulling the pistons back. Once they settle in again, it improves.
Rgds
Steve

"Reality is wrong. Dreams are for real."

Land Rover build:
www.daisythediesel.com

Photos (my other passion and weakness):
http://www.flickr.com/photos/v8moneypit/

Offline dxmedia

  • Posts: 1355
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +2/-2
  • Referrals: 0
Re: Changing Brake Pads
« Reply #2 on: July 14, 2010, 13:25:40 »
Only the first time?


You've moved the pistons back into the cylinders when fitting new pads.

The first time you press the pedal the pistons self adjust pushing the pads to the disk.

If it happens every time, you've air in the system behind the pistons.  You'll need to bleed the brakes.
1959 Unimog 404 DoKa i6
1996 Jeep ZG i6with 6" suspension lift
1999 2.5 v6 Omega autobahn stormer
2001 1.4 Polo

Offline Hightower

  • Moderator
  • ***
  • Posts: 1112
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Changing Brake Pads
« Reply #3 on: July 14, 2010, 19:08:18 »
Thank you for the thoughts, but 'tis now sorted.

Turned out that I'd put the retaining springs back in slightly incorrectly which allowed the caliper to flex away from the pads  :doh:
Simon
1998 Disco Series II Td5 - Not standard
1972 88" Series 3 - The project

Macmillan 4x4 UK Challenge
1st Overall - 2011, 2010, 2009, 2008, 2006, 2005
3rd Overall - 2007

Offline V8MoneyPit

  • Moderator
  • ***
  • Posts: 5077
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +1/-0
  • Referrals: 0
Re: Changing Brake Pads
« Reply #4 on: July 15, 2010, 09:42:20 »
Only the first time?


You've moved the pistons back into the cylinders when fitting new pads.

The first time you press the pedal the pistons self adjust pushing the pads to the disk.

If it happens every time, you've air in the system behind the pistons.  You'll need to bleed the brakes.

But it wouldn't improve if it was air in the system. I'm convinced it can be related to the seals pulling the pistons back. Obviously not the case here though.
Rgds
Steve

"Reality is wrong. Dreams are for real."

Land Rover build:
www.daisythediesel.com

Photos (my other passion and weakness):
http://www.flickr.com/photos/v8moneypit/

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Changing Brake Pads
« Reply #5 on: September 10, 2010, 13:55:44 »
|When ever I fitted new pads to my Cavalier I had to bleed the brakes and this was recomended in the workshop manual too.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal