Events, Gatherings, Out & About > Regional Meets

SNOBs Meet, 1st monday in July, boat inn stoke Bruerne

<< < (3/4) > >>

fatbaz:
Yep, that'll be the one.  Get an axle then we'll worry about when and where we're gonna fit it.  Need to soak all the necessary fittings in WD40 for a few days prior to getting passionate with it.

That'll be;
Brake pipe unions on the calipers
Nut and bolt that hold the brake pipe/ flexi pipe "T" piece to the axle
Nuts and bolts that secure the trailing arms to the axle
The Aframe ball joint nut
The 2 nuts and bolts that hold the ball joint assembly to the A frame arms
The 4 bolts (2 each side) that keep the road spring retainers to pads on the axle

If in doubt give it a squert.

See yous all Monday

Note: Pete, bring your truck and we'll measure up for a shackle lift.

MKMUD:
Thanks for all the help, hopefully picking up the replacement axle this weekend if he gets it off  :clap:

Unfortunately I have to go to Stockholm on Monday and will not be back until Thursday  :(

So Tom and I will not be able to make Monday, he's not happy.

Happy to come along to the maintenance eve, if any bulbs need changing I'm your man, anything else is beyond me. Tom is happy to get dirty if you have any grotty jobs.

Andy and Tom

Loneranger:

See yous all Monday

Note: Pete, bring your truck and we'll measure up for a shackle lift.


[/quote]

Ok will do, are you sure you dont mind, Dodsie i'll pick u up.

dod51e:
Excellent Pete, thas.

I have a much better location for a fix it meet..... my garage in Northampton as there is wire for Lee's lights and a transfer box that needs swapping unless I manage to resist the sledge hammer on it!!!!!  Box decided to go south earlier this week  :evil:

MudRat:
northamptom then, do you need anything,

Navigation

[0] Message Index

[#] Next page

[*] Previous page