Vehicle & Technical > Discovery

Changing Oil Cooler pipes

(1/1)

Andy.:
As it says, how easy/difficult is it  :?:

Cheers.

Oh it's on a 200 tdi Discovery if it makes any difference  :?:

Xtremeteam:
fairly easy just fiddly & can be messy,oh btw the connections into the rad can either be verry tight & pain to undo cos you can only go a flat at a time.

daveh:
Use plenty of newspaper on the ground as you can't really avoid some oil spill. Make sure when you take the old pipes out that you also get out the o-rings they can tend to come off the old pipes and stay in the fittings. Other than that and the fact you will need 24mm spanner, NO PROBLEMS.

Navigation

[0] Message Index