Vehicle & Technical > Discovery

Arghhhh not my month still razza frazzing caliper

<< < (2/2)

Range Rover Blues:
If the bolts are so rusted in place that they snapped I wouldn't have any confidence in stud removers.

When I rounded mine off I ended up splitting the calliper and then slitting the disk off the hub so that I could drill it out from the outside face It can be done but it's a faff.

Bolts, dealer I'd say, or a breaker might have them.

landroverkeith:

--- Quote from: Range Rover Blues on June 09, 2010, 23:41:53 ---If the bolts are so rusted in place that they snapped I wouldn't have any confidence in stud removers.

When I rounded mine off I ended up splitting the calliper and then slitting the disk off the hub so that I could drill it out from the outside face It can be done but it's a faff.

Bolts, dealer I'd say, or a breaker might have them.

--- End quote ---

Ive got the caliper off ok and the disc etc is all off ok its just whats left of the bolts to drill out of the bit thats left on car... and yes i know what u mean ive got at least 2mm into the things b4 they killed the drill bits i had  :evil:

Range Rover Blues:
If you are blunting drill bits that quick, try Cobalt drill bits.

Navigation

[0] Message Index

[*] Previous page