Vehicle & Technical > Defender
300 tdi injection pump
military mad 110:
can anyone help? need to find out what position the mixture screw! the one you have to slacken the nut off on the back of the pump and turn with a screw driver! should it be eg: "wind it all the way in and then wind it out 3 turns" etc. as mines a bit Smokey and has been played with cheers
Saffy:
its not a carburettor!
any how this might be of some use...
http://www.stonefisk.com/doc-arc/def_man/ThermoGuard_Tdi_Tuning_Rev.2.pdf
military mad 110:
still lost! i know how to adjust the diaphram one. its the one thats down at the back/side were the pipes leave the pump and go to the injectors
Range Rover Blues:
It's set with a meter, if it's too smokey you need to make small adjustament 'till you're happy but once you loose the setting it needs special equipment to get it back to the correct setting AFAIK (could be wrong).
military mad 110:
AFAIK what is this? and to you wind it in or out to weaken it?
Navigation
[0] Message Index
[#] Next page
Go to full version