Vehicle & Technical > Isuzu / Frontera

isuzu 4jb wiring

(1/3) > >>

jasonforsythe:
anyone know how to wire up this engine using a defender 110 mod wiring? ie what needs connecting

dxmedia:
1 wire to the stop soliniod

1 wire for the starter trigger

1 heavy cable to the starter from the battery

1 good earth strap.

The tacho comes from a feed behind the fuel pump, the oil pressure is below the fuel pump, the temp sendor is on the top of the stat housing.

That's it.

jasonforsythe:
whers the stop solinoid and the start trigger ta j

dxmedia:
Stop is on the side of the fuel pump at the back end, and the starter feed is the small terminal on the starter soliniod.

ChrisV8:
As said but ...... there might be another stop solenoid hidden round the back of the injection pump, that needs wiring in with t'other one. Took me ages to find that one, it just wouldn't start, once done ran like a goodun, great engine in a 110, especially if you tweak the fuel up a bit, doesn't seem to affect the fuel consumption much either.

Navigation

[0] Message Index

[#] Next page