Vehicle & Technical > Discovery

D2 facelift headlights fitting to D1

(1/2) > >>

hrh_dave:
Hi all...


Our next project for Kirsty's Disco is fitting a set of facelift headlights... Has anyone done this, or know where I could find some more info on how its done???

Cheers

Dave

jay2578:
Will try and find the guide i saw :-k, i know the wing is different on the D2, so the wing on the D1 needs trimming to suit, but looking at my two on the drive it doesn`t look like major work

Cyberprog:

--- Quote from: jay2578 on April 28, 2010, 18:06:20 ---Will try and find the guide i saw :-k, i know the wing is different on the D2, so the wing on the D1 needs trimming to suit, but looking at my two on the drive it doesn`t look like major work

--- End quote ---

From one I saw a while back, the Wing is actually further back on the 300-tdi, and if you fit the facelift lights you end up with a gap between the light and the wing.

Crispywombat:
Did you mean 200 to 300, I've just done mine and it looks really good. Simmonites do a kit but it's the best (or worst) part of £300!!

Yoshi:
Also if its just standard TD5 lights you want they are a straight swap for 300tdi headlights (only the headlights though) but this doesnt apply to the later TD5 style lights.

Navigation

[0] Message Index

[#] Next page