Chat & Social > The Bar - General Chat

Anyone know anything about Imobilisers?

<< < (5/5)

Porny:
There was an immobiliser like that fitted to one of my 90's... didn't take very long to remove... was cat 2 but nothing difficult.  Most immobilisers like this only interrupt two wires to the back of the ignition key; the other wires are a live and an earth.

I'd imagine that the immobiliser will only be connected to the ignition circuit, as on a Diesel there is no point connecting it to the fuel solenoid, all this needs is a 12volts supply under the bonnet and you can jump start the Land Rover.

As long as you can use a multi meter you should be able to sort the wiring out yourself... I have got a spare dash loom if it all goes a bit Pete Tong!!!!

If you were a bit closer would lend a hand.


Ian

Range Rover Blues:
I got mine from GAP security and was quite happy with it.  If it's a cat 2 remember to tell the insurance you've had a new one.  (it's about time insurance companies realised how s***e these products they insist we have fitted are).

Meanwhile a good wheel clamp is worth it's weight in steel :D

(Winchman was selling a couple, but guess where they ended up :D )

Guy90:

--- Quote from: "iianorthants" ---try these
 http://www.alarmwizard.co.uk/micro/index.html

£99 fitted at home and no silly keys :)
--- End quote ---


Cheers mate. I'll give them a ring. Doing from home would be good. Saves me trying to find a way of starting the thing.

Guy90:

--- Quote from: "Porny" ---There was an immobiliser like that fitted to one of my 90's... didn't take very long to remove... was cat 2 but nothing difficult.  Most immobilisers like this only interrupt two wires to the back of the ignition key; the other wires are a live and an earth.

I'd imagine that the immobiliser will only be connected to the ignition circuit, as on a Diesel there is no point connecting it to the fuel solenoid, all this needs is a 12volts supply under the bonnet and you can jump start the Land Rover.

As long as you can use a multi meter you should be able to sort the wiring out yourself... I have got a spare dash loom if it all goes a bit Pete Tong!!!!

If you were a bit closer would lend a hand.


Ian
--- End quote ---


Cheers for the offer :D  going to get an expert to sort it. I'll only mess it up!

Navigation

[0] Message Index

[*] Previous page

Go to full version