Vehicle & Technical > Discovery

2" lift

(1/2) > >>

brite blue:
rite i know people have prob asked this loads  but if i lift a 300tdi disco                2" with springs nd shocks do NEED all the caster orrections or rods n things   or will it be fine with some e xt break hoses??     

ill be happy for your responses

 ta arnie  :D

stretchy:

I think you only need to extend the brake lines if you go to 3in lift

Range Rover Blues:
Ask 5 people, get 5 answers.

I'd say yes, I much prefer how ours handles with castor correction, much prefer it.  Castor correction probably means a Cardan jointed propshaft too rather than a wide angle because the UJ angles on the front no longer match causing a pulsing in the drivetrain.

Longer brake hoses are also a good idea at around £70 a set and use towball spacers on the rear anti roll bar to prevent it inverting (flipping over).

I've also got cranked rear arms (Gwenn Lewis) but they aren't as important, the rear geometry won't be perfect with a lift but it's not that bad at all, mostly I notice a bit more rear axle steer (roll steer) and slightly more prop noise.

brite blue:
I only have a front anti roll bar  the rear has been removed already 

karlo:
Fit the suspension and see, The only thing I had to do with mine when I lifted it 2" was tweak the brackets for the rear flexi hoses slightly.

Apart from that it was fine.

Navigation

[0] Message Index

[#] Next page