Vehicle & Technical > Suzuki

Jimny lift advice

(1/5) > >>

Gromitt:
Ok, so gonna lift the Jimny by 3" this weekend. I have the springs, shocks and CC bushes.

Is there anything I need to know or any easy way of going about this?. Is it best to do the lift then the CC bushes or what ?

baz2236:
Have you got panhard rod and extended brake lines aswell ?

I personally think you be best to do the arms 1 at a time then do your springs.

Where did you get you cc bushes from was it all in a kit or were the bushes seperate.


Make sure you get a before and after shot.

Baz

Gromitt:
Cheers Baz, I got the CC bushes from Bigjimny. I got the lift and extended brake lines from Jimnybits.

I thought that it would be easier to do the arms after the lift with having more room underneath but I bow to your expertise and I will do the arms first.

Just hope the Maxxis Buckshot 235/75's will go on ok without too much body hacking.

Gromitt:
Baz, just a thought, surely when I do the first arm its gonna be a pig to put back on whilst the old arm is holding the axle in the old position, or am I just finding problems that don't exist  :roll: :roll: :roll:

baz2236:
You should have enough movement if not take a bolt out the other side so you can twist it. Squirt all the bolts in wd the night before your doing it to make the bolts undo a little easier.

Navigation

[0] Message Index

[#] Next page