Vehicle & Technical > Discovery

What a nightmare job...........

(1/3) > >>

Disco-Ron:
I've just lifted the engine out of my 300tdi disco, to say the top bolts on the bellhousing ae hard to reach is an understatement...!!!

Took me about 3 hrs to simply release the bellhousing bolts engine mounts and lift the lump out..... dreading trying to bolt it back together!!!

Saffy:

--- Quote from: Disco-Ron on February 14, 2010, 19:34:31 ---I've just lifted the engine out of my 300tdi disco, to say the top bolts on the bellhousing ae hard to reach is an understatement...!!!

Took me about 3 hrs to simply release the bellhousing bolts engine mounts and lift the lump out..... dreading trying to bolt it back together!!!

--- End quote ---
if it like defender... take transmission tunnel out and they very easy to get at.

cooper956:
had no problem when doing my disco clutch always ave plenty of socket extenshions about and sometime  them nucal joints help

Disco-Ron:
Saffy, no tunnel to remove in disco!!!

And i have pletny of extension bars and wibbly joints..... and i removed the engine mounts and lowered the engine as far as it would go, but it was still  a  nightmare....!!

Saffy:

--- Quote from: Disco-Ron on February 14, 2010, 19:59:45 ---Saffy, no tunnel to remove in disco!!!

--- End quote ---
:shocked:

Navigation

[0] Message Index

[#] Next page