Vehicle & Technical > Jeep

viscus fan

(1/3) > >>

Russell:
hi all.
I seam to be having a overheating issue. When i am in really slow moving traffic the jeep seams to be getting hot but when i am moving at 35 or moor its fine and cools right down.  How do you check if the fan is OK?
Last night it overheated to about 110 degrees but but this morning i checked the water and theres loads in there also i cant see water in oil or oil in water.
I recently replaced the water pump but did not refit the fan cowl could that be it?

The Smiths:
Fan cowl needs to be on, then see if you still have the problem

dxmedia:

--- Quote from: The Smiths on January 07, 2010, 19:55:44 ---Fan cowl needs to be on, then see if you still have the problem

--- End quote ---


Is the 2.5 that crap  :shock: :shock:

Wouldn't fitting a 3 or 4 core rad be a better solution?


If it's a 4.0 I'd not be too concened about the lack of cowel, is the viscous unit actually working?

Russell:
Its  the 4 litre how do you tell if the fan is working?
when you hold the engine at about 3k rpm you can hear the fan spin for a couple of seconds then it fades away.
Hopfully i still have the cowl if so i will refit it.

daggie:
thermostat

Navigation

[0] Message Index

[#] Next page