Chat & Social > The Bar - General Chat
9 finger glove
Oz:
Hay guys do any of you know where i can find and buy the illusive 9 finger glove to cover a v8's dizzy/dizzy cap. I know of it existence just can find one any where
TDi90:
bubble wrap and about 1/20th of the price.
Oz:
hmm sounds like a plan but will not just pop due to heat?
V8MoneyPit:
There was someone a few years back who made these, wasn't there? Used to see them at the shows. But can't remember who it was. I'll tax the brain a bit more and try to recall.
I never had a real problem with my V8. I used good quality HT leads with nicely fitting rubber boots, then a tiny smear of grease around the bottom of the cap before fitting it. That worked pretty well. Then, I also used motorcycle chain grease, available in aerosol cans, sprayed over the cap and the ends of the leads. Never had any trouble ever again.
If you have electric fans, make sure you have an over ride switch so you can turn them off when wading. It stops the fans spraying water all over the electrics.
dxmedia:
Can't remeber what it's called, but you can get a waterproofing spray. It leaves behind a thin plasi-coat, put your leads on, make sure that all moisture is out, then spray all over. Used to use the stuff on my crosser and it was supurb.
Navigation
[0] Message Index
[#] Next page
Go to full version