Vehicle & Technical > Defender

injector loom

<< < (2/2)

bombx3:
would a nonocom detect a fault in the loom,,i had great trouble compressing the loom plug into the injector loom plug,there is a blue compression gasket made out off some silcone stuff i am a brickie and it took all of my anger to push it in

extreme90:
on the inside or out
on the outside there are two blue o-rings to seal the plug against the cam ladder/head
then on the inside of the plug ( loom side) there should be another blue webbed sealing ring.
i cant see why you should have a problem fitting the two plugs together unless the sealing ring has moved, the injestor harness male end has been squished so its egged the plug or the pins are bent.

nanocom will bring up either a logged or current open circuit on the relivant injectors, if not all of them.

does it run ok ?

bombx3:
Below turbo kick it is poor ,then now and again its brill ,,the main loom plug Female has a like blue silcone ring .the pins arnt bent ,when i fitted the injector loom first time the plug fitted ok,,makes the mind boggle

Navigation

[0] Message Index

[*] Previous page