AuthorTopic: Fueling v8 efi  (Read 1821 times)

0 Members and 1 Guest are viewing this topic.

Offline Oz

  • Posts: 357
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Guildford
  • Referrals: 0
Fueling v8 efi
« on: November 09, 2009, 22:52:54 »
hay guys is my 1987 range rover 3.5v8 efi single point fuel injection or semi sequential fuel injection.  or single point per bank?

Offline l666ynx

  • Posts: 28
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • i want to get my offroader done
  • Referrals: 0
Re: Fueling v8 efi
« Reply #1 on: November 10, 2009, 09:06:42 »
i would say of there the same as the 3.9 ive just picked up then it will be multi point but then again if im wrong then im sure somebody will be along to correct me
if it aint broke break it

Offline Bowie

  • Posts: 204
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Fueling v8 efi
« Reply #2 on: November 10, 2009, 09:43:00 »
Banked injected, i.e. 4 injectors fire  at a time, one for each bank of the V8.

If you bother looking at the inlet manifold you will see 8 injectors squirting into the cylinder head intake ports.
1980 SIII Lightweight 2.25 Petrol - completely standard.
1991 Range Rover Vogue SE 3.9 V8 - now on LPG (sorted!), 2" lift, mud tyres, and more to come...

Offline Oz

  • Posts: 357
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Guildford
  • Referrals: 0
Re: Fueling v8 efi
« Reply #3 on: November 10, 2009, 10:19:15 »
Lol i would bother looking but im in surrey and the old gal is wales. But thank you very much so she direct injection?

Offline Oz

  • Posts: 357
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Guildford
  • Referrals: 0
Re: Fueling v8 efi
« Reply #4 on: November 10, 2009, 10:20:12 »
Sorry ment multipoint

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Fueling v8 efi
« Reply #5 on: November 15, 2009, 01:02:45 »
Yes it's multipoint but not a very advanced system, it isn't sequential but as said above it fires in 2 banks, LH and RH.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

Offline Oz

  • Posts: 357
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Guildford
  • Referrals: 0
Re: Fueling v8 efi
« Reply #6 on: November 15, 2009, 11:47:22 »
Cheers thank you very much :)

Offline tack43

  • Posts: 351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Worcs, Redditch
  • Referrals: 0
Re: Fueling v8 efi
« Reply #7 on: November 15, 2009, 14:17:16 »
Each injector fires individually for each cylinder - Multipoint - that's why they are as close as possable to each inlet.

Rich
« Last Edit: November 15, 2009, 14:18:54 by tack43 »
Rich

1985 90 300TDI "Defender" SOLD.
1990 RRC 3.9 Vogue LPG
1991 RRC 3.9 Vogue SE "The spare parts box!" Broken for spares
1993 RRC Off-roader. No engine. Yet!
1991 RRC 3.9 Vogue SE "Tempory off-roader" Failed MOT - More spare parts
1992 RRC 3.9 Vogue SE "New tempory off-roader" SOLD

Offline Bowie

  • Posts: 204
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
  • Referrals: 0
Re: Fueling v8 efi
« Reply #8 on: November 16, 2009, 16:11:20 »
Each injector fires individually for each cylinder - Multipoint - that's why they are as close as possable to each inlet.

Rich

Erm, nope, they are bank fired, as above, there are only 2 injector outputs from the ECU, and they ground either the left or right bank, causing all 4 to fire at the same time.
1980 SIII Lightweight 2.25 Petrol - completely standard.
1991 Range Rover Vogue SE 3.9 V8 - now on LPG (sorted!), 2" lift, mud tyres, and more to come...

Offline tack43

  • Posts: 351
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +0/-0
    • Worcs, Redditch
  • Referrals: 0
Re: Fueling v8 efi
« Reply #9 on: November 18, 2009, 19:53:49 »
Each injector fires individually for each cylinder - Multipoint - that's why they are as close as possable to each inlet.

Rich

Erm, nope, they are bank fired, as above, there are only 2 injector outputs from the ECU, and they ground either the left or right bank, causing all 4 to fire at the same time.

 :oops: Should have Known that as I cut those very wires when fitting the LPG. Must remember to fit thinking head before posting!

Rich
Rich

1985 90 300TDI "Defender" SOLD.
1990 RRC 3.9 Vogue LPG
1991 RRC 3.9 Vogue SE "The spare parts box!" Broken for spares
1993 RRC Off-roader. No engine. Yet!
1991 RRC 3.9 Vogue SE "Tempory off-roader" Failed MOT - More spare parts
1992 RRC 3.9 Vogue SE "New tempory off-roader" SOLD

Offline Range Rover Blues

  • Moderator
  • ***
  • Posts: 15218
  • Attack: 100
    Defense: 100
    Attack Member
  • Karma: +3/-0
    • South Yorkshire
  • Referrals: 0
Re: Fueling v8 efi
« Reply #10 on: November 18, 2009, 23:51:40 »
Technically it's still as multipoint system, to distinguish it from a single point system that looks a bit like a carburetor.  They are designed to fire in banks LH and RH but at full throttle the injectors are alomst permenantly open anyway on the bigger engines.  I think my 5.0 has a high pressure regulator to increase peak flow.
Blue,  1988  Range Rover 3.5 EFi with plenty of toys bolted on
Chuggaboom, 1995 Range Rover Classic
1995 Range Rover Classic Vogue LSE with 5 big sticks of Blackpool rock under the bonnet.

 






SimplePortal 2.3.5 © 2008-2012, SimplePortal