Vehicle & Technical > Discovery

Discovery clutch replacement?

(1/3) > >>

howlinmadmartin:
Hi guys my disco needs a new clutch and i was just wondering what the best way to go about this was, ive been told that engine out is the easiest way but i cant see how you would get the top bell housing bolts out. Any suggestions or advice would be greatly appreciated its a 200 tdi by the way
many thanks
martin

Skibum346:
I've heard engine out is easiest as well... that said, either way you'll need to get the internal transmission tunnel out (drill out the rivets) and that should give access (although not easily) to the bell housing bolts.

Remember to fit a re-inforced clutch fork while your at it... and a relaese bearing (Right name?)... you wouldn't want to go back in  there in a few weeks now would you..?

Skibum

Fourby:
it is possible to change a clutch by dropping the gearbox from underneath, but you'll need the muscle of a few mates and/or some jacks and blocks of wood if you try.

barmiebrumie:

--- Quote from: Fourby on November 03, 2009, 14:59:40 ---it is possible to change a clutch by dropping the gearbox from underneath, but you'll need the muscle of a few mates and/or some jacks and blocks of wood if you try.

--- End quote ---

or down my pit  ;)



John

bogie:
VERY LONG EXENSION BAR!

Navigation

[0] Message Index

[#] Next page