Vehicle & Technical > Discovery

Getting at the heater matrix ?

<< < (4/5) > >>

weeone:

--- Quote from: BigA on November 06, 2009, 08:44:44 ---
Defiinately getting hot water to matrix, all water sysmtem recently checked, and the matrix is getting hot.

i will take you advice on checking the flap controls, as i think that this is where the issue is now, i think the flaps may be stuck/blocked. i recently had the fan unit out, and the flaps on top of that for changing from external to internal air source were completely jammed with hard mud.

cheers, i will update after a look.

--- End quote ---

If you've had the fan out, you've had the facia out - you can't do it any other way :)

BigA:

--- Quote from: weeone on November 06, 2009, 16:28:21 ---If you've had the fan out, you've had the facia out - you can't do it any other way :)

--- End quote ---

Managed to do that with the facia in.

But all out and back in today and here was the problem;



And that is literally how it was once i took the back of the heater unit of.  :oops:

bilge rat:
guess you found the fault then ;)

landroverkeith:
Blimey no wonder we all got through the mud run ok andy looks like u got it all in ya matrix m8  :dance:

BigA:

--- Quote from: bilge rat on November 07, 2009, 17:50:43 ---guess you found the fault then ;)

--- End quote ---

Yep all nice and warm now  :)


--- Quote from: landroverkeith on November 07, 2009, 18:04:47 ---Blimey no wonder we all got through the mud run ok andy looks like u got it all in ya matrix m8  :dance:

--- End quote ---
That will have been Abi's driving again  :lol:

Thanks everyone for help  :clap:

Navigation

[0] Message Index

[#] Next page

[*] Previous page