Vehicle & Technical > Discovery

Wheel alignment - what do I need to do?

<< < (3/3)

piggysteve:
I did mine using the measurements in the manual, when the tracking was checked at the local tyre place it was spot on.

bogie:
The old school way of checking your tracking is a piece of string.  The distance between the n/s and o/s wheels has to be the same at the front of the wheel  and the rear of the wheel. Its just as easy to do it by eye!

mattyme:

--- Quote from: Disco-andy on November 24, 2009, 21:45:48 ---From memory ( I'm not going out to the garage at this time) the distance between the center of the two track rods should be 123.5cm to get the wheels stair.  As allready said 4 wheel stuff is useless on a disco1 as you can't ajust any thing 

--- End quote ---


ive used the computer at work several times on my disco 1. theres plenty to adjust with regard to wheel alignment.

it doesnt cost me anything so why use a piece of string or measure them when i can let the computer do it for me!! lol

i do still have to do the adjusting tho!!

Navigation

[0] Message Index

[*] Previous page