Vehicle & Technical > Discovery

what size bolt for rear diff?

<< < (2/2)

Matt_H:
Firstly I'm 99% sure it is imperial.  The are not QT but QT copies, pretty much exactly the same minus the bolts - hence why I got them for 1/3 of the QT price.

I believe it is something or other imperial with a fine thread - which I don't have guages for!

thanks for the QT heads up I'll have a look on their website :-)

It can't be drilled out Kev because you would end up going through I imagine the drive shaft input bearings!


Matthew

Henry Webster:
I'm pretty sure its imperial too, but don't know exactly what.  The holes are there for the steering damper to mount to on the front and seeing as the diff is the same this is why they can also be found at the back.

Regards

H

Matt_H:
aha that makes sense then!  At least I can take a bolt out of the front and take it to a nut and bolt place that way :-)

TA!

karloss:
They are 100% certainly imperial, and I can't find the bloomin tap now! So, sorry not sure on the size, 3/8 something, I'm sure.

Navigation

[0] Message Index

[*] Previous page