Vehicle & Technical > Discovery

rebuilding my disco 300 front axel, jelp me please

(1/2) > >>

savage:
 :oops: Ive picked up a three door disco,7 seater, she,s nice and tidy except for the usual rear floor, thats not the problem, the front Axel is rusted at the point where the panhards are bolted on ,can anyone tell me what these are called and if i can purchase them?? I'm a novice welderand considering where it is I'm not sure if i could fabricate them myself to a road safety standard, the floor as i said i can do, pals pals pals can anyone help me, thanx in anticipation sav.  p.s. I'm not that good on the comp either so if you could ring me or text me that would be great ,07915547763

Disco-andy:
have a look at these guys they may be able to help you.....

http://www.yrm-metal-solutions.com/

Other than that there are a lot of people braking discos, may be easyest to just put a new one on.

Disco_Stu:
Having had an axle bracket break on me (A buttock clenching moment and no mistake...) I would just get a decent second hand one. They can be had for £50 -100 quite easily on ebay, forums and scrappys.

Considering you're a novice welder, replacing a panhard rod bracket at exactly the right angle is not the best begiiners project.

Stu.

boss:
you can get axles damn cheap, i sold both mine for £75 which is peanuts when you consider how much a genuine new CV is or a diff

Range Rover Blues:
You can use the axle casing from a 200 or 300 model, or RRC built after 1986 ish, the ones with 7 bolts on the swivels.

Navigation

[0] Message Index

[#] Next page