Vehicle & Technical > Discovery

300 tdi Auto solid brakes

<< < (4/4)

Big Rich:
I have replaced the Servo and vacume pump but the breaks wenk solid so the disco could not move. I bled the flied out so it could be moved. Any ideas now what to look at?

Thanks

Rich

Big Rich:
Replaced the servo and Vacume pump. Nice sharp breaks but then lock on solid after about 400 yards.

I'm scratching my head now. Any ideas? What do I look at next? where would yuu go from hear?

Any help and ideas really appreciated.

Rich

Scotsman:
Hi, did you replace any washers/spacers between the servo and master cylinder?, not done the disco ones myself but had the same prob with a leyland daf van. I fitted new servo and cylinder but forgot the plastic distance piece so when you press the pedal, the fluid goes in as normal but not all returns. Next time you brake, the brakes start to bind then they locked up

Big Rich:
Didn't see any spacers. Just took the old off and the new land rover part on.  :-.

Navigation

[0] Message Index

[*] Previous page