Vehicle & Technical > Defender

Swivel bearings kits

(1/2) > >>

90Mike:
Hi guys does any one know where i can get swivel kit from for a 110 on a f reg,could do with the complete kit including the swivel and bearings and some info on what they are like to do never had to do one before,i have just gave mail order 4x4 a go but he cant get the early type any more  :doh: 

Bob696:
Paddocks sell them. I have a set sitting here that needs to go into our '83 110 before august 8th. I have never done one either :-(

Range Rover Blues:
Are they different on the early one-ten then?

Try paddocks but I suggest you avgoid the "teflon" coated ones as the coating doesn'tlast very long.

Bob696:
the early 110s (and I think most upto about L reg) use the series ones. One bearing and a pin or summat.

tack43:

--- Quote from: Bob696 on July 14, 2009, 07:08:31 ---the early 110s (and I think most upto about L reg) use the series ones. One bearing and a pin or summat.

--- End quote ---

Same idea as series, but top pin (Railko bush), is a different size to 90/110. Easy enough job to do. Follow the workshop or haynes manual. Unless the swivel is pitted, use the old one. Works out about £16 a side for bits unless something else is fubared!

Rich

Navigation

[0] Message Index

[#] Next page