Vehicle & Technical > Range Rover

3.9v8 engine removal

(1/2) > >>

TechnoTurkey:
Hi,

I'm just in the final throws of removing the engine from the Rangie that I'm scrapping, I have removed all the ancillaries and drained all the fluids etc.

I've just got the bellhousing bolts to remove now and should be ok.  But I have also ready that you need to undo a series of bolts on the torque convertor, accessible through the lanel below the bellhousing - is this correct?

Thanks

trecfive:
Yes.

TechnoTurkey:
Cheers - I thought I was on the home straight as well!

hairyasswelder:

--- Quote from: TechnoTurkey on July 10, 2009, 15:44:13 ---Cheers - I thought I was on the home straight as well!

--- End quote ---

There are only 4  ;)

Range Rover Blues:
You can pul the engine without doing it but then the torque converter stays on the engine and you are far more likely to damage something.

Navigation

[0] Message Index

[#] Next page