Vehicle & Technical > Discovery

Fitting an internal Auxliary Battery to my Disco 2

<< < (3/3)

300TDi Disco:
Fit dry cell battery then you don't have to worry about gases or major vibrations.

Mud_Medic:
I had the frame made to measure. it is made of steel inch square tubing which I have painted black. (they wanted too much money for powder coating!)

The batteries were from a caravan dealer, and the inverter is sterling combi inverter/charger. (1600w continuous and 40 amp charge)

I have a split charge system using nothing more than a simple 40a automotive relay.

I know this is a bit of an overkill, but then again, I did it because I can!

Ed

300TDi Disco:

--- Quote from: Mud_Medic on July 08, 2009, 19:49:12 ---Here are some pictures of my setup.

I have mounted the inverter on top of the batteries.

I have mounted the positive cable from the batteries inside a piece of hosepipe to protect them :D

Ed

--- End quote ---

Wow, like the work you have done there. I could run my house off that. Fair play.

Navigation

[0] Message Index

[*] Previous page