Vehicle & Technical > Suzuki
what all do i need for vit lift??
Fat_vit:
--- Quote from: generation-x on July 02, 2009, 22:09:42 ---ps 15" rims still wont fit right with 32mm wheel spacers
ive tryed it even with mega offset fatboy rims they still rub on the calipers
simon
--- End quote ---
They would if I kept my wheels I have wont they??
Here are my wheels
generation-x:
hi m8
still dont think they wud fit without taking a grinder to ur calipers
i tried with negitive offset fatboy alloys and they still locked up on the calipers with 32mm
wheel spacers and studs tightened up
if you want to spend another £200 ish you cud see if you can find some 50mm billet
spacers but you takes ur chance to see if that works
end of the day the geeeeeveee was built for 16" rims and bigger to be fitted
personaly id not take a grinder to the brakes just incase
simon
Fat_vit:
--- Quote from: LandRoger on July 03, 2009, 00:08:05 ---Why all the bother to fit 15s lots of messing about and you end up looseing an inch under the diffs ,sell your 15s and get some 16inch rubber -i have a 2in lift susp and 2inch body this gives me 15in ground clearance under the chassis and 8 under the diffs, all the parts from Bits4 Vits and its all quality kit also running 32s with 235/85/16s my truck is 02 GeeVee swb,
--- End quote ---
Would I be able to fit 16 inch wheels and tyres, once I've replaced the lowered springs with standard ones, fitted the 1.25 inch spring spacers and the 1.5 inch strut spacers, but without chopping or modding the arches or bulkhead??
Anything else I'll need to fit, will the camber be out or will I need to fit shock spacers?
generation-x:
--- Quote from: Fat_vit on July 21, 2009, 15:58:07 ---
--- Quote from: LandRoger on July 03, 2009, 00:08:05 ---Why all the bother to fit 15s lots of messing about and you end up looseing an inch under the diffs ,sell your 15s and get some 16inch rubber -i have a 2in lift susp and 2inch body this gives me 15in ground clearance under the chassis and 8 under the diffs, all the parts from Bits4 Vits and its all quality kit also running 32s with 235/85/16s my truck is 02 GeeVee swb,
--- End quote ---
Would I be able to fit 16 inch wheels and tyres, once I've replaced the lowered springs with standard ones, fitted the 1.25 inch spring spacers and the 1.5 inch strut spacers, but without chopping or modding the arches or bulkhead??
Anything else I'll need to fit, will the camber be out or will I need to fit shock spacers?
--- End quote ---
hi m8
yes ur be able to fit 16" wheels tyre size will be dependant on ur total lift but id guessinmate size in the region of 235/70/16 shud fit nicely
camber again is a funny thing some vits need it some dont
if you have fitted front dampner extensions this will enuf with coil spacers and lift springs
you will have to swap out the rear shox for longer items again dependant on budget you have pro-comp uk ,llama 4x4 which sell rough country or my personaly favourite mk2 astra rear shox ( cause they are cheap and easy to get hold off )
hope this helps
simon
Navigation
[0] Message Index
[*] Previous page
Go to full version