Vehicle & Technical > Range Rover

Relays

(1/2) > >>

R2D2:
Hi Folks, guess who jumper-wired the wrong relay then?   :oops:

Just need to know if/how I remove the spades from inside the relay socket please?    Seems to have only cooked the earth wires from one connection  (pin 30 or 86) not sure which.

promise to put me glasses on this time  :doh:   :roll:  :roll:


Cheers

woody:
pin 30 is the heavy live feed that is switched on using the relay (30 amp??)
86 is either live or earth for the switch (5 amp)
if you use a multi meter you should be able to check which is live and earth

R2D2:
Cheers Woody, but how do I get the connectors out of plug/socket?    Ta

300TDi Disco:
Hope the pic helps.

Range Rover Blues:
All I can advise is plyers, if there isn't enough for you to reach then some major surgery is required.  It is possible to dismantle the fuse holder but it's very fiddly and they aren't designed to be stripped down.

Navigation

[0] Message Index

[#] Next page