Vehicle & Technical > Range Rover

EAS valve block

(1/2) > >>

Lucy1978:
Does anyone know where I can get replacements for the collets that hold the air lines into the valve block from? I've recently picked up a 2nd hand valve block and there are some missing.

Cheers

Chris

Range Rover Blues:
IIRC they are standard BSP fittings, if you are short then some of the fitting form old airbags might also do.  I'll have a look what I'd got when I have time.

Lucy1978:
They're supposed to be push fittings into the valve block, but the guy I got this one from has pulled them, and some have popped out and are missing.

waveydavey:
You pop them out to change the O Rings behind as part of a block rebuild.
Normally you don't throw them away but as RRB says the other end of the pipe is the same so an old air spring should provide a replacement.

Range Rover Blues:
Ah, now I think I understand, the pipe fitting themselves are broken.  I'll have a look and see if they are replaceable with the ones form air springs etc.

Navigation

[0] Message Index

[#] Next page