Vehicle & Technical > Defender

Axle swap

<< < (2/2)

Range Rover Blues:
You need to swap the hubs on the front and rear, the stub axles and halfshafts on the rear, the stub axles and CV joints on the front then I think you are ok.  The callipers you keep IIRC you'll just find the hubs are nut quite as long and the stub axle shorter so they clear the alloy.

I think (please correct if I'm wrong) but you can fit the parts from a RRC or Disco1 with ABS onto the ends of your Defender axles too.  If they arte non-ABS then you need to swap the swivles over.

Navigation

[0] Message Index

[*] Previous page