Vehicle & Technical > Defender

deflex bushes any good?

<< < (3/3)

clbarclay:
They should be too hard to work out what goes where take out.

The 12 little cylindrical bushes are for the damper pin mounts.
The 4 tapered bushes are fopr the top of the rear dampers (if its these that seem too big then bush have a laugh about it and then fit some new standard rubber bushes in place of these instead).
The 4 for the radius arms to chassis and the 4 for trailing arms to chassis are pretty unique in design.
That leaves the top hat shaped bushes (2 top hats and a crush tube per bush). The littlest pair of these are for the panhard rod. The 4 big top had bushes are for the radius arm to axle. This leaves 2 other sizes of top hat bushes for the rear suspension. IIRC the pair which are larger diameter and but narrower are for the A frame to chassis and the wider but smaller diameter pair are for the trailing arm to rear axle.

BobtailBogey:
yeah it aint hard to work out but it would be nice to have a part number or someting on it just for your referance.

i still aint had chance to fit them this weekend having trouble starting my new V8 to worry about fitting bushes.

clbarclay:
Ah V8s :lol:

Wheres that block of wood to touch to ward of evil.

Navigation

[0] Message Index

[*] Previous page