Vehicle & Technical > Isuzu / Frontera

frontera auto hub clicking on drivers side ?

<< < (2/4) > >>

Toppo:
Thanks again  that was a good right up . im going to clean them both out and regrease , also gunner get a new circlips ,,  is there any special way you have to locate it ,, or just line the lugs up ,, thanks mark 

Drift:
Ello Phil, long time no see  :D

Toppo, its like a jigsaw, it will only go back one way ( the backing plate ) the rest is as you say, line up and bolt on  :)
Just use a light smear of grease on the outer part of the hubs, to much grease can stop them working.

If money is ok get yourself some manual hubs, well worth it in the long run.

dxmedia:
Clicking can also happen if the guts of the auto hubs are gummed up from never being used. Leave to soak all night in some de-greaser and then reassemble with 5gram of grease per hub. Any more and you'll get hydraulic locking on the teeth and they wont work correctly.

You'll get loud banging from auto's occasionally too - that's the teeth jumping if your turning on a hard surface like rock. You'll [!Expletive Deleted!] yourself first time it happens ;)

shinyheed:

--- Quote from: Drift on March 18, 2009, 09:34:10 ---Ello Phil, long time no see  :D



--- End quote ---

hello mate, i'm still around, just rarely get on fog these days since its so long since my beloved fronty went

Drift:
As long as your doing ok  :cool:

Navigation

[0] Message Index

[#] Next page

[*] Previous page