Vehicle & Technical > Suzuki

adjustable front panhard set up problem

<< < (3/5) > >>

jamesey:
got a right problem with it now , the nut that fastens to the axel (n/s) has rounded in the hole and comes loose on its own , ive been off roading today and nearly has a right accident , what can i do without changing the front axel??? :shock:

glaggs:
Drill the bolt out - or pesuade it out some other way and then get the thread repaired.

jamesey:
i drilled it out last time and retapped it to a bsp thread but its worked looseagain and stripped it , the only thing i can have done noe is take out the bolt put the panhard back in the slot put some thresded bar in and weld it in fron the back then just put a nut and washer on it , if i need another panhard bush ill just have to chop it off , the bushes are proper poly ones so they should be ok :?

glaggs:
The only danger is that there might be too much clearance between the threaded bar and the centre of the bush.

jamesey:
i cant think of anything else to do besides got another front axel

Navigation

[0] Message Index

[#] Next page

[*] Previous page