Vehicle & Technical > Discovery

Swivel joints.....almost done..

<< < (5/5)

lee celtic:
Good idea with running the tap through the ends of the axle . I will do that tomorrow cheers :clap:

I did bin the splitter in the end I put the nut back on a few turns then warmed the arm up a bit and gave it a good smack  :lol:

bigwood:
I helped my mate change the front diff on his RR a while back.To save pulling the hubs down we decided to split the axle at the swivel joint. My side no sweat ,his side lots of swearing and cursing. On checking the problem he had not allowed enough room between the hub and the wall for the lengh of the half shafts. I did explain to him he only had to pull the shaft out far enough to clear the diff. Still it was worth a free drink not to tell people of his error. We now have a white line down the middle of the workshop. :lol:

Navigation

[0] Message Index

[*] Previous page