Vehicle & Technical > Defender

td5 running problems

<< < (2/2)

Jimbo:

Kev,

The oil in the injector loom problem does that - comes and go's....... :roll:

Change the loom, and whilst you're at it clean the oil out of the plug at the front of the head - the one that plugs into the injector rail that you'll be swapping out.

Personally, I'd not worry about the slight leak from lower down - probably more hassle than its worth to try and sort it out.

kevinf:
did the injector wiring loom at the weekend also cleaned out  the plug at the ecu also removed and inspected/cleaned the
maf  map and crank postion sensors,all found to be reasonabley clean,but still the intermitant fault persists and again there are no warning lights on the dash suggesting a engine management fault and the engine starts first time



any ideas


cheers kevin

Navigation

[0] Message Index

[*] Previous page