Vehicle & Technical > Suzuki

just fitted a 3" lift kit but,,,,,,,,,

(1/4) > >>

jamesey:
i have 2 issues , ive fitted the 3" kap springs and fitted rhino rays cranked radius arms but now the rear steering arm rubs the radius arms , how do i get over this , also the front  panhard bolt that goes into the threadded part of the front axel has rounded and i cant tighten the front passenger side up??
and just 1 more thing will i need a front prop shaft extension as the toothed bit on the front rubber is showing????? :embarrassed:

glaggs:
1 - check your rear srearing ling is straight - there should still be clearance?
2 - Your going to have to do a thread repair - Helicoil or similar.
3 - You need a spacer, D+G do them, but I guess some one will do them in the UK cheaper.

jamesey:
whats a rear srearing ling

glaggs:
My crap typing... should read

....rear steering link ....

jamesey:
just got off the phone with darren at kap and he said that the front radius arms are wrong , the arms were from rhino rays and i need to take them off ,  :-> thats another £150 waisted , he said there angled too much and i need to put the standard arms back on and stregthen them and just put some proper bushes in , also the threadded bolt hole in the axel he said i need to chop it out :shock:and weld another in





last picture is the bolt thats spinning , and its the pre mounted nut in the axel not the nut thats treaded this needs to be tight or wham :x

Navigation

[0] Message Index

[#] Next page