Vehicle & Technical > Series Land Rovers

300tdi into s11

<< < (2/2)

stuntman:
You will need flares for the truck if you use the modern axles, you may get away with it if you dont use modulars.

p4203:
def don't want arches looks like i will go with lt77 with ashcroft conversion to keep series axles then graft power steering in from early rangie

stuntman:
You can get series flares, i think I may have a set lying around somewhere, they still look period

Les Henson:
You'll need arch eyebrows unless you fit really skinny tyres :)
I tried to upload pictures with my original post, but I can't do it. They are either on my pc or in the gallery on LR4x4.
I moved the outlets on the intercooler to one side - top and bottom, then used defender mounts to hold it in place. I then used 300TDi 90-deg bends to point the pipes towards the engine. With the oulets on the intercooler moved - it's only 95mm wide, so fits between the rad and front panel quite nicely.

Thread on the intercooler modification is here -

http://forums.lr4x4.com/index.php?showtopic=2797

I have pictures of the completed front panel, but you can't see them :(


Les.

p4203:
cheers les that looks good

Navigation

[0] Message Index

[*] Previous page