Vehicle & Technical > Discovery

engine rebuild

(1/1)

meader:
i am in the middle of rebuilding my 300tdi engine. pistons in and big end caps on but wot i need is the torqe stettings settings for the big end caps nuts and head bolts oh and a pic pls of the way to tighten each bolt and wot order

Les Henson:
Big end cap nuts should be 59Nm.
Head bolts are as follows -
Stage 1    -  40Nm
Stage 2    -  Further 60-deg
Stage 3    -  Further 60-deg
Stage 4    -  -Bolts 1,2,7,8,9,10,15,16,17,18 - further 20-deg.

Les.

mobi:
thanks les, i give him my rave cd the other night.

Navigation

[0] Message Index