Vehicle & Technical > Defender

Lights question!

(1/2) > >>

andyhubbard:
Can get my side lights on by using the flick switch under the horn/indicator switch but cannot get the head/mainbeam lights on,no horn either. Is this switch prone to going faulty is so do i remove the steering wheel to replace it,thanks Andy.

tom38:
have you checked fuse for them as i think the  main lights and horn run through the same fuse  :-k

andyhubbard:
Must admit to only having a quick check but tomorrow is another day and it's set aside purely for the landy so will do a proper job this time as i'm planing on taking the dash apart and fitting the radio/cd player and also the ham radio in properly.
And if all goes well fitting the new alloys.

andyhubbard:
OK - Replaced blown fuse and now have the horn and flash :doh:,still have indicators too so i'm now thinking relay or switch,anyone with any ideas please. [-o<

Niel:

--- Quote from: andyhubbard on January 14, 2009, 13:32:33 ---OK - Replaced blown fuse and now have the horn and flash :doh:,still have indicators too so i'm now thinking relay or switch,anyone with any ideas please. [-o<

--- End quote ---
Its probably the feed wire to the switch from the loom plug, broken off at the attachment point on the stalk switch, BTDT soldered the begger back on.

Navigation

[0] Message Index

[#] Next page