Vehicle & Technical > Defender

2.5na cylinder head

(1/2) > >>

trickydicky:
does anybody know if a 2.5na head will fitt a 2.5td (19j)? thanks rich

Jerome:
I asked a similar question a while backfor my '86 90 2.5NA, here is the reply i received:-

"TD and NA heads are exactly the same as each other, although the part number (for both) changes on later engines around 89/90. SO it might be worth trying to find out if this is off a later engine. Engine number would be ideal."

I seem to remember someone mentioning that the TD head would be for a higher compression - but i am by no means an expert, hopefully somone on here can help.


bogie:
gday mate. the heads r interchangable,but the swirl chambers r larger on td head,which means a slight loss of power,but still goes better than the n/a lump.

trickydicky:
thanks for the info matey i will let you know how i get on

craig_midz:
if u need a td head i got one here in kings norton if anygood to ya

Navigation

[0] Message Index

[#] Next page

Go to full version