Vehicle & Technical > Defender

Poly bush kits?

<< < (2/3) > >>

clbarclay:
Are the old polyurethane bush question :lol: Untill someong new is found, its all been typed before


* You get what you pay for
* You don't need a press to remove old metalastic bushes

V8MoneyPit:

--- Quote from: clbarclay on January 08, 2009, 11:47:53 ---Are the old polyurethane bush question :lol: Untill someong new is found, its all been typed before


* You get what you pay for
* You don't need a press to remove old metalastic bushes
--- End quote ---

But if you burn them out, which is what I assume you are referring to, make sure you wear an adequate mask.
It took nearly 30 tonnes to shift my A frame bushes by pressing them out.

Landy Andy:
Hi Ian (Porny)

Can you quote me for a full set, it's 90 TD5 standard height, and are they in stock?

Thanks Andy

clbarclay:
I wasn't refering directly to burning. Drilling is another option, either chain drilling a ring of small holes or maybe just drilling a couple of swarf holes and then a hole saw to cur the centre sleave(s) out.


I do have an old fly press, but without exactly the right diameter adaptor I find its easier to just push the middle sleave out of the bush and then cut out the outer sleave.

Porny:

--- Quote from: Landy Andy on January 09, 2009, 10:57:18 ---Hi Ian (Porny)

Can you quote me for a full set, it's 90 TD5 standard height, and are they in stock?

Thanks Andy

--- End quote ---

Hi Andy....

You have a pm.


Ian

Navigation

[0] Message Index

[#] Next page

[*] Previous page