Vehicle & Technical > Defender

TD5 ECU extension leads

(1/2) > >>

JAKEYBABY:
Hi all I need to get myself some extension leads so i can move my ecu, I know scrapiron sell them just wondered if anyone knows of a cheaper more reliable source ?

Landy Andy:
Have seen them for sale, can't remember where, sorry. (But was about £300)

But I have been told that you can pull enough cable through to add about one meter, this means that you can put it on the bulkhead behind the seats, quite a safe height I would think.

Andy

P.s. If you find cheaper looms let me know.

Shabba277:
Hi Jakeybaby, might be worth a chat with Gary at www.TD5Alive.com , I was over there today and he mentioned the supply of these leads, not sure how far on he is with them though, he's a nice bloke and its gotta be worth an ask, he is a member on here too, id is td5alive.
Good luck
Ady

Range Rover Blues:
£300 :shock: I'm in the wrong job :-.

Porny:

--- Quote from: Range Rover Blues on January 05, 2009, 22:33:58 ---£300 :shock: I'm in the wrong job :-.

--- End quote ---

The plugs work out to £60 or there abouts... it's just all the wires you need to fit pins to!! - it's the labour charge that shoves the cost up (and converting one of the plugs from surface mount to hard wire)

A cheaper option is just to re-route the standard wiring... you can mount the ECU on the bulkhead between the front seats... and that costs nothing bar a bit of time.

The other problem with extention harnesses is that they 'can' casue problems.... due the change in resistance caused by the extra wiring.


Ian

Navigation

[0] Message Index

[#] Next page