Vehicle & Technical > Mitsubishi

2.8 shogun do they hav EGR valve? or other bits to clean?

<< < (2/3) > >>

jorkila:
Well it would seem that i have an egr valve lol!! How would i benefit from blanking mine off?

marjan:
The EGR valve is there to push any unburnt vapour back into the induction system but it also has the effect of choking the engine slightly.

By blanking it off you will ensure that you only get 100% clean fuel vapour into the engine and believe me you will notice the difference. It will run smoother, pull better and do a little more to the gallon.

While I'm on here can I just make a recomendation to all Paj/Shogun diesel owners, every so often stick a good quality diesel treatment in the fuel tank. Best one I found was Valvoline Max Life, made a heck of a difference.

jorkila:
Cheers mate, what thickness does the blanking plate need to be and do i do away with the old one/s?

jorkila:
Ordered a blanking plate from pajerouk, do i need to remove anything or just undo the bolts and slip the new plate in?
Cheers Rob.

marjan:
just remove the bolts, slip it in and replace the bolts.

Navigation

[0] Message Index

[#] Next page

[*] Previous page